These applications give you a broader control over the specifics of your entire network of TimeMachines devices. You can set one display to display only the date, while others are clocks or timers. You can customize some of your displays to become network clock timers when needed – individually or synchronized in various groups across the network. If you have lots of TimeMachines NTP wall clocks on your network, you can use any of our free applications to monitor, adjust, or expand the functionality of your PoE and WiFi Network Clocks collectively from one spot rather than on each individual device's configuration page. More than just a clock – PoE Network Clock Timers Once that is all customized to your needs, you are all set. You can also change the device name (Conference Room #1, Classroom #104, Front Office, etc.), set the access password, and make brightness adjustments from this configuration page for an individual device. The alarm capabilities of this device that can be utilized if a relay connector is added to connect the clock to a buzzer or bell. Within the individual configuration page, an individual display can be configured to be a count-up or count-down timer. There are additional configuration sections to customize daylight savings settings, as well as date and time display options. All displays on the network should be set to the same time source(s) on their configuration page to ensure synchronization. These are the basic configuration settings that set your time source and enable your time synchronization within the network. Once you are logged in, within the configuration page, you can assign your preferred NTP time source (either within your network or outside), a secondary time source, any time zone customization that may be required, and your display format (12 hour or 24 hour). This will take you to the web-based graphic user interface for configuring your clock. Then using a web browser (Chrome and Firefox are recommended), type in the IP address that was displayed as the URL. Simply push the button on the back of your clock two times to get the DHCP served IP address for your clock – it will scroll across the display. Now you are ready to customize the clock settings for your location. Within a few moments, it will synchronize and display time. These PoE NTP wall clocks are simple to set up – simply plug it in to a PoE enabled Ethernet network connection. Whether your time is sourced internally or through the internet, all of these networked clocks will display synchronized time wherever they are located within your facility. Every PoE network clock display is assigned a unique IP address within your network, and can be configured to either an internal network time source, or an external, internet-based time server like NIST Internet Time Service. The TimeMachines PoE digital wall clock displays use Network Time Protocol (NTP) to display your network's time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |